Background Music; Select Bgm Source; Select Zones - Bosch Plena Voice Alarm System Installation And Operation Manual

Plena Voice Alarm System
7.2

Background music

The background music (BGM) is controlled using the BGM controls on the front of the voice
alarm controller, voice alarm router and their remote control and remote control extensions.
Proceed as follows to route BGM:
1.
2.
7.2.1

Select BGM source

Select the BGM source with the Select button on the front of the voice alarm controller (see
Figure 7.3). A green LED indicates the source that is selected.
–
–
Figure 7.3 BGM source selector
7.2.2

Select zones

The BGM is distributed to the zones with the Zone select buttons on the voice alarm
controller (see Figure 7.4), voice alarm router, remote controls and remote control
extensions. A green LED indicates the zones to which BGM is distributed.
–
–
Figure 7.4 BGM zone selector
Bosch Security Systems B.V.
Select the BGM source (see section 7.2.1 ).
Select the zones (see section 7.2.2 ).
If the source is a CD player or a tuner that is connected to the CD/Tuner input, choose
CD/Tuner.
If the source is an auxiliary source that is connected to the Aux input, choose Aux.
Select Zone select
CD/Tuner Aux
+
-
0
- +
If the Zone select indicator is off, no BGM is distributed to the zone. Push the Zone select
button to distribute the BGM to the zone.
If the Zone select indicator is on, BGM is distributed to the zone. Push the Zone select
button to stop distributing the BGM to the zone.
Select Zone select
CD/Tuner Aux
- +
+ 0
-
Installation and Operation manual
Operation | en
9922 141 1037x (V2.16) | V0.6 | 2011.09
75