Background Music; Introduction; Select Bgm Source; Select Zones - Bosch Plena Installation And User Instructions Manual

Voice alarm system
Table of Contents

Advertisement

Plena Voice Alarm System | Installation and User Instructions | Operation
25

Background music

25. 1

Introduction

The background music (BGM) is controlled using the
BGM controls on the front of the voice alarm controller,
voice alarm router and their remote control and remote
control extensions. Proceed as follows to route BGM:
1 Select the BGM source (see section 25.2).
2 Select the zones (see section 25.3).

25.2 Select BGM source

Select the BGM source with the Select button on the
front of the voice alarm controller (see figure 25.1). A
green LED indicates the source that is selected.
If the source is a CD player or a tuner that is
connected to the CD/Tuner input, choose CD/Tuner.
If the source is an auxiliary source that is connected
to the Aux input, choose Aux.
Select
CD/Tuner
-
+
+
0
-
figure 25. 1 : BGM source selector
Bosch Security Systems | 2006-06 | 9922 141 10377 en
Zone select
Aux

25.3 Select zones

The BGM is distributed to the zones with the Zone
select buttons on the voice alarm controller (see figure
25.2), voice alarm router, remote controls and remote
control extensions. A green LED indicates the zones to
which BGM is distributed.
If the Zone select indicator is off, no BGM is
distributed to the zone. Push the Zone select button
to distribute the BGM to the zone.
If the Zone select indicator is on, BGM is distributed
to the zone. Push the Zone select button to stop
distributing the BGM to the zone.
Select
CD/Tuner
Aux
+
-
0
-
+
figure 25.2: BGM zone selectors
25.3.1 Adjust volume
The voice alarm controller has two types of controls to
adjust the BGM volume (see figure 25.3). The overall
(maximum) volume of the BGM source is set with the
master volume control, which is located below the BGM
source selector (Select button, see figure 25.1). Per zone
that is connected to the voice alarm controller, the local
volume can be adjusted with the zone volume switches,
which are located below the zone selection buttons
(Zone select, see figure 25.2).
Select
CD/Tuner
Aux
-
+
0
-
+
figure 25.3: BGM volume controls
The local volume in the zones that are connected to
voice alarm routers must be adjusted using local volume
controls.
en | 87
Zone select
Zone select

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents