Accompany Mode; Radio Noise Check - Bosch NurseCall Main Unit User Manual

32 en | Programming
4.3.8

Accompany mode

NOTICE!
The accompany mode is not available if the locating mode is set to OFF.
See Section 4.2.3 Locating mode, page 24.
1.
¬ Parameter Nr. 05
Function ACCOMPANY ¡
2.
¬ ACCOMPANY ?
3.
¬ Function ACCOMPANY
RANGE:
4.
5.
4.3.9

Radio noise check

1.
¬ Parameter Nr. 06
Radio Noise Check? ¡
2.
¬ Radio Noise Check?
3.
¬ Radio Noise Check?
4.
5.
F.01U.252.699 | V1.1 | 2012.01
Select the parameter Nr. 05.
Press .
-> YES
Activate (YES) or deactivate (NO) the accompany mode. The default parameter is NO.
231 - 254 ¡
If you select YES, define the range of the doors that will be activated in the accompany
mode. The first number is the lower limit, use
to 250. The second number (254) is the upper limit and cannot be changed.
Confirm with .
Select the parameter Nr. 06.
Press .
-> YES
Select YES or NO. The default parameter is YES.
Relay Output OFF
If you select YES, you must choose to activate (ON) or deactivate (OFF) the relay output.
If you choose ON, the contact closes in the case of a radio noise event. If you choose
OFF, the contact stays open. The default parameter is OFF.
Select with and
Confirm with .
¡
¡
¡
.
User Manual
NurseCall Main Unit
and to choose from 231
Bosch Security Systems