Rs-232 Output Setting - Bosch NurseCall Main Unit User Manual

NurseCall Main Unit
4.3.5

RS-232 output setting

NOTICE!
Within the NurseCall Main Unit, the RS-232 interface should be configured with jumpers.
See Section 3.2.7 Setting the jumpers on the communication board, page 18.
Select one of the following:
–
–
–
–
–
1.
¬ Parameter Nr. 02
RS-232 Output
2.
¬ RS-232 Output
None
3.
NOTICE!
For the values None and Printer, you do not have to define more parameters.
Setting the interface to Alarm Management Software
¬ RS-232 Output
Alarm Management SW¡
1.
¬Alarm Management SW
TRansm.ID>RS232:Off¡
2.
Bosch Security Systems
None
Printer
Alarm Management SW
PAGING
DECT
Select the parameter Nr. 02.
Press .
Set the desired value with
Select Alarm Management SW in the RS-232 Output menu. Confirm with
Activate (On) or deactivate (Off) the forwarding of transmitter ID via the RS-232 interface
with and
¡
£
and . Confirm with
. Default value is Off.
User Manual
Programming | en 27
.
.
F.01U.252.699 | V1.1 | 2012.01