Test Mode - Bosch Integral TM13 Operating Instructions Manual

If in doubt, look it up

Test mode -

Starts various test procedures. The telephone cannot be used during test-
ing. This function must be enabled by your BOSCH TELECOM service rep-
resentative.
Test no.
Test number on: Checks whether the number of a calling party is stored in
your telephone book as a data number. Only stored numbers are accepted.
Test TA -
Tests the terminal adapter.
Time/partner
Query time/partner: Update time and partner display on your telephone.
Time zone
You can select the starting time zone upon which the time display of the
other cities is based. The default setting is "Frankfurt".
Tone dialing next
You can send tone-dialed numbers during a call, e.g. to activate an answer-
ing machine.
Tone dialing next slow/medium/fast
You can change the length of DTMF pulses (DTMF = dual tone multifre-
quency dialing). This may be necessary if an answering machine does not
react to the signals transmitted by your phone. Some answering machines
require a pulse length of 1,000 ms, others 100 ms. The default setting on
your phone is 500 ms.
Transfer call
Connect an additional caller with a refer-back party.
-
Trap
You can register the call number of an unwanted caller in the system. This
function must be enabled by your BOSCH TELECOM service representa-
tive.
128
Menu items on the display "