Displayed Error Messages; Displayed Error Messages - imagistics fx2080 User Manual

Displayed error messages

Occasionally, your machine encounters some trouble transmitting or receiving docu-
ments. When it does an alarm will sound alerting you to the issue. You can identify
the problem with by reading the displayed or printed messages.
Message on the display
[Sort] must be turned
On when making a
duplex copy.
Add/Edit cannot be
performed.
ADF is unavailable.
Set the document on the
FBS glass.
ADF used in the feeder
command.
Already stored.
An attachment cannot
be scanned to the folder
from which it was
added.
An I.D.Code is needed.
An LDAP server has
not been registered.
Check the LDAP server
settings.
An LDAP server has not
been selected. Check the
LDAP server settings.
An LDAP server must
be registered
Auto ratio is set.
Box in use.
Broadcast cannot be
turned off.
Calibrating Scanner
Call Service :Code
Cannot change the
setting for Rx separator
cassette.
Cannot combine with
Card copy.
Cannot enter additional
commands
Cannot find the domain
14-16 m
aintenance
You tried to set [Sort] to [OFF] while Duplex Copy. Duplex Copy should be combined
with sort.
You cannot add/enter destinations to the Address Book while selecting other destina-
tions.
You tried to make a Card Copy using the ADF. Use the document glass.
There is a delayed manual transmission to be sent. To edit the Fax Setting or run a
Macro program, wait until the job is done or cancel the job.
You tried to select a number that has already been selected. Enter a different number.
You tried to scan to folder with files attached and save them to the same folder where
the attached files are originally saved.
You cannot set "0000" as an I.D. Code for Security box.
The advanced search failed due to an internal machine error. Check the LDAP server
setting again, and try the search again. For more information about LDAP server set
up, refer to the "Network Guide".
LDAP server has not been set up. To use the advanced search, set up the LADP server
on your machine prior to searching. For more information, refer to the "Network Guide".
Auto ratio is selected automatically.
To specify the zoom ratio, press [Zoom] and enter your desired zoom ratio.
You tried to erase an F-Code box which contains at least one document.
Erase the document(s), then try again.
You tried to set Broadcast to [OFF] after multiple destinations have been selected.
The scanner is warming up now.
An internal error has occurred. Please contact the Imagistics National Diagnostics
Center at 1-800-243-5556.
The cassette/tray you selected is used for separator page. Select other cassette/tray.
Your selected function cannot be combined with card copy.
The stored commands are full. Wait until one or more jobs are done.
DHCP configuration failed. Check the Network setting. For more information, refer to
the "Network Guide".
& t
roUBleShootinG
Description / Solution