Check Message" Printouts; Check Message" Printouts - imagistics fx2080 User Manual

Hide thumbs Also See for fx2080:
Table of Contents

Advertisement

"Check Message" printouts

When there is a problem with your machine detects an error, it produces an error
printout headed by the words "Check Message". This printout lists the following
information about the fax transaction:
• The resulting error code (See "Error code" next page.)
• A communications error message (See "What error messages can mean" below.)
• The TTI (or phone number) of the fax machine with which your machine had
attempted to communicate.
What error messages can mean
The error messages on Check Message printouts can mean a variety of things. Here
is a brief summary:
Error message
Check condition of remote fax.
Repeat transmission.
Line is busy.
Check received documents.
Specified attached file(s) was not found.
Could not connect to the location.(Folder)
Could not connect to the location.(FTP)
Please confirm the size of attached file(s)
Memory full.
Dialing number is not set.
Stopped.
Possible meanings
• Remote machine malfunctioned
• No "Handshake" signals from remote fax
• Wrong phone number reached
• Poor phone line conditions
• No "Handshake" signals from remote fax
• Document misfeed or miscount
• Unable to reach remote machine after attempt-
ing specified number of redial tries
• Remote machine's line was busy
• Remote machine's line didn't answer
• Remote confirmation signal not received from
remote fax
• Poor line conditions caused a poor image
• Network setting is not set up
• There is no connection to the network
• The user name or password is not entered cor-
rectly
• The folder is not shared
• The folder link is not entered correctly
• Network setting is not set up correctly
• There is no connection to the network
• The user name or password is not entered cor-
rectly
• The folder is not shared or the folder is write-
protected
• The folder link is not entered correctly
• The attached files exceeds the limit. (Should be
within 10MB.)
• Remote fax's memory is full
• Stored phone number failed to dial properly
• Someone pressed [Stop] at the remote fax in the
middle of the "Handshake"
m
& t
aintenance
roUBleShootinG
1
2
3
4
5
6
7
8
9
10
11
12
13
14
AI
14-23

Advertisement

Table of Contents
loading

Table of Contents