Accessing Other Fax Settings; Accessing Other Fax Settings - imagistics fx2080 User Manual

The underlined settings are factory defaults.
Function
Resolution This sets the default setting for the resolution of the document to be scanned. By setting
it to a level suitable for the most commonly sent document type, you can reduce the time
and effort required when making changes.
Contrast This sets the default setting for the contrast of the document to be scanned. By setting
it to a level suitable for the most commonly sent document type, you can reduce the time
and effort required when making changes.
TTI Set to [ON] to send the TTI information.
[ON] and [OFF] toggle every time you press [TTI].
Memory Tx This sets whether to give the priority to memory transmission or to real-time transmis-
(See page 3-5) sions when sending faxes. Memory transmissions are prioritized when [ON] is set and
real-time transmissions when [OFF] is set.
You can also select to give the priority to memory transmissions or to real-time transmis-
sions each time you send a fax.
[ON] and [OFF] toggle every time you press [Memory Tx].
Cover Page Set to [ON] to add a cover page containing a simple message to every fax.
(See page 3-32.) [ON] and [OFF] toggle every time you press [Cover Page].
Tx Report Set to [ON] to print out a transmission report for each fax.
(See page 13-8.) [ON] and [OFF] toggle every time you press [Tx Report].
Overseas Tx Set to [ON] to enable the overseas transmission all the time.
[ON] and [OFF] toggle every time you press [OverseasTx].

Accessing other fax settings

1
Press [Setting], [Fax Settings].
2
Press [Other Settings].
3
Set or change the selected items.
For details on each setting, refer to the following table:
4
When you finish, press [Reset] to return to the standby mode.
Description Setting
Normal
Fine
S-Fine
Photo
Lightest
Lighter
Normal
Darker
Darkest
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
m S
achine ettinGS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
12-5