Turning Department Management Protection On/Off; Turning Department Management Protection On/Off - imagistics fx2080 User Manual

Turning department management protection On/Off

This feature protects the department management settings from unauthorized
access. After you set it, you will have to enter the passcode to access the department
management settings.
NOTE: This feature will work only if you have activated the passcord protection (See
page 11-2.)
1
Press [Setting], [Management], [Next], [Depart. Management], [Protect].
2
Use the numeric keys to enter the passcode, and then press [Enter].
3
Press [ON] to protect department management.
• Press [OFF] to cancel the function.
4
Press [Enter] to save the setting.
5
Press [Reset] to return to the standby mode.
r
eStrictinG USe oF the machine
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
11-21