Deleting A Call Group; Deleting A Call Group - imagistics fx2080 User Manual

4
(1) Press [Group Members].
(2) Specify the destination(s) to add to the group.
• Specify the destination(s) using the address book.
– or –
• Specify the address book number.
NOTE: You cannot use the numeric keys to manually enter a destination. Group mem-
bers must be pre-registered into the address book before they can be added to a
group.
Fax numbers and e-mail addresses can be registered into the same call group.
(3) Press [Enter].
5
A group information will be displayed.
6
To register additional call groups, press [Enter], then repeat the procedure from
step 2.
Press [Reset] to exit the operation and return to the standby mode.
NOTE: • To print a list of call groups, press [Setting], [List], [Group]. Then press [Yes].
• Destinations can be added to a group during the initial registration process.
(See page 2-4.)

Deleting a call group

1
Press [Setting], [Group].
2
Press the call group you want to delete.
3
Press [Delete], [Yes].
If you want to exit without deleting, press [No].
4
To delete another call group, repeat the procedure from step 2.
Otherwise, press [Reset] to exit and return to the standby mode.
U a B
SinG the ddreSS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2-15
ook