Hole Punch Mode (Optional) - Oce im2330 / im2830 Operator's Manual

3.SELECTING FINISHING MODES (Cont.)

Hole Punch Mode (Optional)

When the optional hole punch unit is attached to the finisher (Optional), you can hole punch your copies.
* The paper weight should be in the range of 17 lb. to 53 lb. Special paper such as OHP files or labels is
excluded.
1
Place paper in the drawer(s).
3
- "5.SETTING COPY PAPER"
- When using this mode in bypass copying ("Bypass Copying"
Page 61), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS"
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
4
Press the [HOLE PUNCH] button.
Select other copy modes as required.
5
Press the [START] button.
Available paper sizes for the hole punch:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)
North America
(IM2300020N)
* The paper mentioned above is Océ-recommended paper.
Specifications and appearance are subject to change without
notice in the interest of product improvement
94
3.SETTING OF BASIC COPY MODES
Page 36
Page 51
Number of punch holes and hole
diameter
2/3 holes switchable
(0.315" dia.)
Available paper size
2 holes: LG, LT-R, COMP, A4-R
3 holes: LD, LT, A3, A4