Oce im2330 / im2830 Operator's Manual page 255

3
Select the "USER GROUP" you want to
change, and then press the [EDIT] button.
- Switch to the applicable menu using the [prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
the desired user group using the digital keys.
4
Key in the "Password" (5 digits) for
selected group, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip to
step 5.
5
Press the [NAME] button and/or the
[USER NAME] button.
- When pressing the NAME button, the menu of entering letters
("Setting Letters"
with up to 20 letters.
- Enter the name with up to 30 letters for the "USER NAME" as the
above manner.
- To change the password only, skip step 5.
6
When pressing the [PASSWORD] button
on the menu of step 5, the menu is
switched as shown on the right. Key in the
changed number (5-digit identical
number) in both "Password" and "Retype
Password", then press the [ENTER]
button.
- Not to change the password, skip step 5.
Page 30) is displayed, so enter the name
11
251