4.ADDING STAPLES (OPTIONAL) (Cont.)
5
Pull out the seal holding the staples
straight upward.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
If "Check staple cartridge" remains, repeat the above procedure
from step 1 to 6.
7
Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment
and the finisher (optional).
This could injure you.
12
284
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL