The Control Panel - Oce im2330 / im2830 Operator's Manual

Make sure that a gap of approx. 0.02" (less than 0.04" in total) is left
between the paper and the side guide. If there is no gap, this could
cause paper misfeeding.
7
Push the drawer straight into the copier
until it comes to a stop.
- Be sure to push the drawer fully in.
Be careful not to let your fingers be caught when closing the drawer.
This could injure you.
8
Change the size mark plate to match with
the size of paper that has been set.
9
Press the [USER FUNCTIONS] button on

the control panel.

10
Press the [USER] button, then press the
[GENERAL] button on the touch panel.
1
0.5mm
( 0.02'' )
41