Oce im2330 / im2830 Operator's Manual page 219

Error Code
2D31, 2D33 Failed to create file
2D32 Failed to delete file
2D40 Failed to convert image file format
2D60 Failed to copy file
2D62 Failed to connect to network destination.
Check destination path.
2D63 Specified network path is invalid. Check
destination path.
2D64 Logon to file server failed. Check
username and password.
2D66 Failed to process your job. Insufficient
disk space.
2D67 FTP service is not available.
2D68 File Sharing service is not available.
2DC0 Job canceled
2DC1 Power failure occurred
Store to e-Filing
2B10 There was no applicable job.
2B11 Job status failed.
2B20 Failed to access file.
Cause & Message Corrective Action
Make sure that the access privilege to the
storage directory is writable and the server or
local disk has a sufficient space in disk
capacity. Then retry the scan.
Turn the power OFF and then back ON. Retry
the scan.
Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
Make sure that the network path is correct,
and retry the scan. If the error still occurs, ask
your administrator to confirm whether the IP
address or path of the server is correct. Also
make sure that the server is operating
properly.
Make sure you specify correct network folder
and retry the scan.
Make sure you specify correct user name and
password to logon the file server and retry the
scan.
Delete the data in the local shared folder in the
equipment and retry the scan.
Ask your administrator whether the FTP
service is configured correctly.
Ask your administrator whether the SMB
protocol is enabled.
Job was canceled.
Make sure that the power cable is connected
properly and it is inserted securely. Resend
the job.
Retry the scan.
Retry the scan. The system could not store the
scan job.
Retry the scan. The system could not store the
scan job.
9
215