Troy-Bilt Bronco CRT Service Manual page 20

Troy-Bilt Small Frame Tillers
7.31. Inspect the tiller shaft assembly for wear or dam-
age inside the transmission case. See Figure
7.31.
Tiller Shaft Worm Gear
Figure 7.31
7.32. Remove the left and right oil seals from the
transmission housing, at the wheel shaft, using a
long 3/16" flat blade screwdriver. See Figure
7.32.
Oil Seal
Figure 7.32
NOTE: Make certain the transmission oil seal
bores are not damaged during removal.
Bronze Bushing
Spacer
Spacer
Bronze Bushing
Wheel Shaft
7.33. Remove the left and right retaining rings secur-
ing the wheel shaft in position using medium
retaining ring pliers. See Figure 7.33.
Retaining Ring
7.34. Remove the external shims from right and left
sides of the wheel shaft using a small hook tool
and a stick magnet. See Figure 7.34.
Wheel Shaft
16
Wheel Shaft
Figure 7.33
External Shims
Figure 7.34