Ultra Start 640 Series Install Manual page 10

INSTALL GUIDE
Menu 1 - User Settings
Setting 1- Ignition Auto Lock
1 Ignition Lock & Unlock Enabled 1 Light Flash
2 Ignition Lock Only
3 Ignition Auto Lock Disabled
Press the Program Switch 1 time to select setting 1 (This will be confirmed by 1 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Program Switch. To move to next program step or repeat to change selection.
Setting 2- Horn Honk Settings
1 Lock & Unlock chirps Disabled
*2 Chirps Enabled
Press the Program Switch 2 times to select setting 2 (This will be confirmed by 2 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Program Switch. To move to next program step or repeat to change selection.
Setting 3- Door Lock Options
1 Double Pulse Unlock
2 3 Second Lock & Unlock
*3 0.75 Second Pulses
Press the Program Switch 3 times to select setting 3 (This will be confirmed by 3 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Program Switch. To move to next program step or repeat to change selection.
Setting 4 -Sensor - Enable / Disable
1 Sensors Disabled
* 2 Sensors Enabled
Press the Program Switch 4 times to select setting 4 (This will be confirmed by 4 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Program Switch. To move to next program step or repeat to change selection.
Setting 5 - Passive / Active Arming
1 Passive Arming
2 Active Arming With Rearm
* 3 Active Arming
Press the Program Switch 5 times to select setting 5 (This will be confirmed by 5 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Program Switch. To move to next program step or repeat to change selection.
Setting 6 - Active / Passive Locks
1 Active Locking
*2 Passive Locks
Press the Program Switch 6 times to select setting 6 (This will be confirmed by 6 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Program Switch. To move to next program step or repeat to change selection.
Doors Lock/Unlock when the key is turned On/Off
2 Light Flashes Doors Lock when ignition key is turned ON only
3 Light Flashes Doors do not Lock or Unlock with Ignition key
1 Flash
3 Flashes
1 Flash Single .75 second lock and double unlock pulse
2 Flashes 3 second pulses for lock & unlock
3 Flashes 0.75 second pulses for lock and unlock
1 Flash
2 Flashes
1 Flash Auto Arms 30 seconds after last door is closed
2 Flashes Unlock is pressed and no door is within 30 sec.
3 Flashes
1 Flash Doors do not auto-lock with passive arming
2 Flashes Doors Auto-Lock with passive arming.
A audible chirp for Panic Mode only
Chirp indication for all functions
Shock sensor and Aux. Sensor disabled
Shock Sensor and Aux. sensor enabled.
Alarm arm by remote transmitter only.
PAGE 10