Accessing a server blade with local KVM
For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION:
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Open the serial label pull tab and connect the HP c-Class Blade SUV Cable to the server blade.
1.
Connect the video connector to a monitor.
2.
Connect a USB mouse to one USB connector.
3.
Connect a USB keyboard to the second USB connector.
4.
Item
1
2
3
4
Accessing local media devices
Use the following configuration when configuring a server blade or loading software updates and patches
from a USB CD/DVD-ROM.
Use a USB hub when connecting a USB CD-ROM drive to the server blade. The USB hub provides additional
connections.
Open the serial label pull tab and connect the HP c-Class Blade SUV cable to the server blade.
1.
Connect the video connector to a monitor.
2.
Connect a USB hub to one USB connector.
3.
Connect the following to the USB hub:
4.
USB CD/DVD-ROM drive
o
USB keyboard
o
Before disconnecting the SUV cable from the connector, always squeeze the release
Description
Monitor
USB mouse
USB keyboard
HP c-Class Blade SUV Cable
Cabling 73