Cabling; Using The Hp C-Class Blade Suv Cable; Connecting Locally To A Server Blade With Video And Usb Devices; Accessing A Server Blade With Local Kvm - HP ProLiant BL465c G6 User Manual

Cabling

Using the HP c-Class Blade SUV Cable

The HP c-Class Blade SUV Cable enables the user to perform server blade administration, configuration,
and diagnostic procedures by connecting video and USB devices directly to the server blade. For SUV
cable connectors, see "HP c-Class Blade SUV Cable (on page 11)."
Connecting locally to a server blade with video and
USB devices
Use the local I/O cable to connect a monitor and any of the following USB devices:
•
USB hub
•
USB keyboard
•
USB mouse
•
USB CD/DVD-ROM drive
•
USB diskette drive
Numerous configurations are possible. This section offers two possible configurations.

Accessing a server blade with local KVM

For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION:
release buttons on the sides of the connector. Failure to do so can result in damage to the
equipment.
Connect the SUV cable to the server blade.
1.
Connect the video connector to a monitor.
2.
Connect a USB mouse to one USB connector.
3.
Before disconnecting the SUV cable from the connector, always squeeze the
Cabling 34