Cabling; Using The Local I/O Cable; Connecting Locally To A Server Blade With Video And Usb Devices; Accessing A Server Blade With Local Kvm - HP ProLiant BL460c Maintenance And Service Manual

Cabling

In this section

Using the local I/O cable........................................................................................................................ 47

Connecting locally to a server blade with video and USB devices ................................................................ 47

Using the local I/O cable
The local I/O cable enables the user to perform server blade administration, configuration, and
diagnostic procedures by connecting video and USB devices directly to the server blade. For local I/O
cable connectors, see "Local I/O cable (on page 58)."
Connecting locally to a server blade with video and USB
devices
Use the local I/O cable to connect a monitor and any of the following USB devices:
USB hub
•
USB keyboard
•
USB mouse
•
USB CD/DVD-ROM drive
•
USB diskette drive
•
Numerous configurations are possible. This section offers two possible configurations.

Accessing a server blade with local KVM

CAUTION: Before disconnecting the local I/O cable from the connector, always squeeze the release
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
NOTE: For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
Connect the local I/O cable to the server blade.
1.
Connect the video connector to a monitor.
2.
Connect a USB mouse to one USB connector.
3.
Cabling 47