Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly latch.
2.
Install the access panel
3.
Mezzanine card
To remove the component:
Power down the server blade (on page 23).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
Remove the mezzanine assembly
4.
Remove the mezzanine card from the mezzanine assembly.
5.
("Access
panel" on page 25).
("Access
panel" on page 25).
("Mezzanine
assembly" on page 32).
Removal and replacement procedures 33