Fbwc Procedures; Removing The Capacitor Pack - HP 656395-006 Maintenance And Service Manual

Remove the SAS controller
5.
Lift the handle on the SAS controller, and then remove the T-15 screw from the NAND flash module
6.
bracket.
Remove the NAND flash module bracket, and then remove the NAND flash module from the SAS
7.
controller.
To replace the component, reverse the removal procedure.

FBWC procedures

Three types of procedures are provided for the FBWC option:
•
Removing the capacitor pack (on page 39)
•
Replacing the FBWC capacitor pack and cable (on page 42)
•
Recovering data from the FBWC (on page 48)

Removing the capacitor pack

To remove the component:
Power down the server blade (on page 23).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
Disconnect the capacitor pack cable:
4.
("SAS controller" on page 38).
("Access panel" on page 25).
Removal and replacement procedures 39