Drive Blank; Drive - HP 656395-006 Maintenance And Service Manual

Drive blank

Remove the component as indicated.
To replace the component, squeeze the release latch and slide the drive blank into the bay until it clicks into
place.

Drive

To remove the component:
Determine the status of the drive from the drive LED definitions
1.
77).
Back up all server blade data on the drive.
2.
Remove the drive.
3.
To replace the component:
CAUTION:
or the enclosure unless all drive and device bays are populated with either a component or a
blank.
To prevent improper cooling and thermal damage, do not operate the server blade
("Hot-plug drive LED definitions" on page
Removal and replacement procedures 26