Editing Waypoints; Adding A Waypoint; Deleting A Waypoint - Pioneer AVIC-HD3 Operation Manual

3
Touch the screen and place the scroll cur-
sor on the point where you want to view
the detail or the entire picture. Or zoom in
or zoom out the map scale.
The map around the scroll cursor is zoomed in
or out so you can view the detail or the entire
picture.
4
Touch [Back].
The screen returns to the previous display.
❒ You can also check the overview by using
the shortcut menu if [Whole Route Over-
view] is selected on the [Short-Cut
Selection].

Editing Waypoints

You can select waypoints (locations you want to
visit on the way to your destination) and you can
recalculate the route to pass through these loca-
tions.

Adding a waypoint

Up to 5 waypoints can be selected, and selected
points can be sorted automatically or manually.
❒ Even if you already set five waypoints, you can
add a new waypoint after passing through any
one of them.
❒ The waypoints that you have already passed
are deleted when you add a new one.
1
Touch [Destination] in the navigation
menu, and then touch [Route Overview].
2
Touch [Waypoints].
The waypoint menu screen appears.
3
Touch [Add].
The "Select Search Method" screen appears.
After searching for a point, display it on a
map, then touch [OK] to add to the way-
points. (You can add up to five waypoints in
total.)
4
Touch [OK].
A route is recalculated, and "Route confirma-
tion screen" appears.
➲ "Checking and modifying the route" ➞
Page 25
❒ If you set waypoints in the route to your
destination, the route up to the next way-
point will appear in light green. The rest of
the route will appear in light blue.

Deleting a waypoint

You can delete waypoints from the route and then
recalculate the route. (You can delete waypoints
successively.)
1
Touch [Destination] in the navigation
menu, and then touch [Route Overview].
2
Touch [Waypoints].
The waypoint menu screen appears.
3
Touch [Delete], then touch the waypoint
you want to delete.
The touched waypoint will be deleted from the
list.
4
Touch [OK].
The route is recalculated, and "Route confir-
mation screen" appears.
➲ "Checking and modifying the route" ➞
Page 25
29