Touch Key Operation; Operate The External Unit By Using 1 Key; Operate The External Unit By Using Function 1 - Function 4 - Pioneer AVIC-HD3 Operation Manual

Touch key operation

1
Touch the source icon and then touch
[EXT 1] or [EXT 2] to select the external
unit.
When the source icon is not displayed, you
can display it by touching the screen.
Touch keys
(2)
(3)
(1) Send an , , , or  command
Touch to operate the external unit.
❒ Operation varies depending on the external
unit connected. (In some cases, some func-
tions may not be used until you touch and
hold the key.)
(2) Send a band command
Touch to send a band command to the external
unit.
❒ Operation varies depending on the external
unit connected. (In some cases, the external
unit may not respond.)
(3) Send a 1 key to 6 key command
➲ "Operate the external unit by using 1 key — 6
key" ➞ Page 108
(4) Operate the external unit by using
Function 1 to Function 4 key and Auto/Man-
ual key
➲ "Operate the external unit by using Function 1
— Function 4" ➞ Page 108
➲ "Switching the automatic and manual func-
tion" ➞ Page 109
108
Operate the external unit by
using 1 key — 6 key
The external unit can be operated by transmitting
the operating commands set to 1 key — 6 key.
1
Touch [1 — 6 ].
2
Touch desired key ([1 — 6 ]) to operate
the external unit.
(1)
(4)
❒ To return to the previous screen, touch
[Back].
❒ Operation varies depending on the exter-
nal unit connected. (In some cases, some
functions may not be used until you touch
and hold the key.)
Operate the external unit by
using Function 1 — Function 4
The external unit can be operated by transmitting
the operating commands set to Function 1 —
Function 4.
❒ The operating commands set to Function 1
— Function 4 vary depending on the external
unit.
1
Touch [Function].
2
Touch [Function 1, 2, 3 or 4].
The operation command is transmitted to the
external unit.
❒ Some functions may not be used until you
touch and hold the key.
❒ To return to the previous screen, touch
[Back].