Installing/Removing Elevating Legrests; Installing; Removing - Invacare Formula CG Seating User Manual

5 USAGE

5.10 Installing/Removing Elevating Legrests

Installing

1. Turn legrest to side (open footplate is perpendicular to wheelchair).
2. Install the legrest hinge plates onto the hinge pins on the wheelchair
frame.
3. Rotate legrest toward the inside of the wheelchair until it locks in
place.
 The footplate will be on the inside of the
wheelchair when locked in place.
4. Repeat STEPS 1-3 for the opposite legrest.
5. After the user is seated in wheelchair, adjust footplate to correct
height by loosening nut and sliding the lower footrest assembly UP
or down until desired height is achieved.

Removing

1. Push the legrest release handle toward the inside of the wheelchair
(facing the front of the wheelchair) and swing the legrest to the
outside of the wheelchair.
2. Lift UP on the legrest and remove from the wheelchair.
3. Repeat STEPS 1- 2 for opposite side of wheelchair.
Invacare® Formula™ CG Seating
Hinge Pins
Hinge Plates
Bolt/Nut
FIGURE 15
54
Legrest Release Handle
Installing/Removing Elevating Legrests
Part No 1143155
Calfpad
Legrest