Removing/Installing The Wheelchair Shrouds Tdx Sp/Sr; Rear Shroud; Front Shroud And Battery Retention Bracket; Top Shroud - Invacare Formula CG Seating User Manual

7 SETUP/MAINTENANCE

7.18 Removing/Installing the Wheelchair Shrouds TDX SP/SR


For this procedure, refer to FIGURE 16 on page 101.

Rear shroud


Reverse this procedure to install the rear shroud.
1. Remove the three pan head screws that secure the rear shroud to the base frame.
2. Remove the rear shroud from the base frame.

Front Shroud and Battery Retention Bracket

Reverse this procedure to install the front shroud and battery retention bracket.

The front shroud and battery retention bracket are removed from and installed onto the wheelchair frame as a single unit.
1. Remove the two socket head screws securing the front shroud/battery retention bracket to the base frame.
2. Lift up to unhook the battery retention bracket from the base frame and remove the front shroud/battery retention bracket from the base frame.

Top Shroud


Reverse this procedure to install the top shroud.
1. Remove the seat from the base frame.
2. Remove the four pan head screws securing the top shroud to the base frame.
3. Lifting up, remove the top shroud from the base frame.
Invacare® Formula™ CG Seating
100
Part No 1143155