Repair Or Service Information - Invacare Formula CG Seating User Manual

Repair or Service Information

WARNING
Except for programming, DO NOT service or adjust the wheelchair while occupied, unless otherwise noted.
Before adjusting, repairing or servicing the wheelchair, Always turn the wheelchair power Off, otherwise, injury or damage
may occur.
Wheelchairs should be examined during maintenance for signs of corrosion (water exposure, incontinence, etc.). Electrical
components damaged by corrosion should be replaced immediately.
Wheelchairs that are used by incontinent users and/or are frequently exposed to water may require replacement of
electrical components more frequently.
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing.
Transport ready packages are not retrofittable to existing models and are not field serviceable.
TDX® SP Wheelchair Bases Only
A pinch point exists between walking beam/head tube cap and telescoping tube when at the lowest seat to floor height. Refer
to Pinch Points on page 19.
Pinch point may occur when returning the tilted seat to the full upright position or when lowering the seat. Make sure the
hands and body of the occupant, attendants and bystanders are clear of all pinch points before returning the tilted seat to the
full upright position or lowering the seat.
Part No 1143155
17
2 SAFETY
Invacare® Formula™ CG Seating