Iopn.mtcmon Fault Handler Status Messages - HP NetServer AA 4000 Manual

Chapter 13

IOPn.MtcMon Fault Handler Status Messages

IOPn.MtcMon Fault Handler status: An error occurred while sending synchronization information to the Fault Handler
on the other IOP.
Severity Error
Description A networking or system resource error occurred while the Fault Handler on the local IOP was
attempting to communicate with the Fault Handler on the remote IOP during the join process.
This may indicate a problem with the network cards or cabling. It may also indicate a resource
problem on one of the IOPs or a network card configuration error.
Related Messages None
Action • Examine the other messages in the event log that were logged at around the time of this
• Check the network card configuration for the IOPlink cards on each IOP to make sure that
• Also check the IOPlink cabling to the other IOP to make sure that it is intact.
• If the error recurs and you cannot find an indication of a network cabling or netcard error,
190
failure to determine if there is an indication of netcard or network malfunction.
they are consistent with each other.
contact your service provider for assistance.
MtcMon Messages