Chapter 2
MIC identity unknown
Severity
Informational
Description
The MIC element identity (CE1, CE2, IOP1, IOP2) has not been specified in non-volatile
memory (or has been reset to the "Unknown" setting). The MIC BIOS automatically places the
system in the setup utility so an identity can be selected.
Action
• Select the appropriate element identity.
• Save the setting in non-volatile memory.
• Upon exiting the setup utility, reboot the appropriate element to reinitialize the firmware
MIC initialization complete
Description
The MIC initialization performed at system POST (Power-On Self Test) is complete. If this is
an IOP, this is the last message displayed by the MIC BIOS. On CEs, control returns to the
System BIOS to complete initialization. The MIC later regains control to manage the boot or
synchronization process.
Action
No action is required.
MIC internal error: module linen context context data
Variables
n – the line number
Severity
Error
Description
An unexpected hardware or firmware error was detected in the specified module at the
specified line. The context data provides additional information about the error.
This error should not occur during normal operation.
Action
Contact your service provider for assistance.
to the new setting.
MIC BIOS Messages
53