Mic Bios Messages - HP NetServer AA 4000 Manual

Chapter 2

MIC BIOS Messages

Automatic reboot in x seconds.
Variables x – the amount of time in which the reboot will occur
Severity Informational
Description After a non-recoverable error is displayed, the MIC BIOS will pause for 30 seconds so the
message can be viewed before automatically rebooting to reset the CE.
Action No action is required.
Beginning boot process with IOPx. . .
Variables x – the ID of the IOP facilitating the boot process
Severity Informational
Description The specified IOP has been selected to boot the CE. All further communication ensues with
this IOP.
Action No action is required.
Beginning synchronization with CEy via IOPx. . .
Variables x – the ID of the IOP that is facilitating the synchronization process
y – the ID of the CE with which synchronization is occurring
Severity Informational
Description The specified IOP has been selected to facilitate synchronization with the specified CE.
Action No action is required.
MIC BIOS Messages
47