Drawer Key - TEC MA-1535-2 series Owner's Manual

12. GENERAL MAINTENANCE
12.5

Drawer Key

RELEASE
3. To remove the Partition from the Coin Case, pull the
Partition upward. Set the Partition in the groove where you
like, then push down the Partition.
4. To change the layout of the Bill Case, it is necessary to
remove the Bill Holder. To remove the Bill Holder, remove
the three screws to detach the Bill Holder Ass'y from the
Money Case. Then remove the screw to detach the Bill
Holder from the Plate. To remove the Partition, pull it
upward.
Insert the Drawer Key into the Drawer Key Lock, then turn it
90 counterclockwise to lock the Drawer.
LOCK
12- 3
EO1-11149
12.5 Drawer Key