Manager Pass Code Programming (Submode 39) - TEC MA-1535-2 series Owner's Manual

4. PROGRAMMING OPERATIONS
Example) To program the following amount to each key.
[+] key
Preset Amount: 0.50
HALO:
Tax Status:
[-] key
Preset Amount: 1.00
HALO:
Tax Status:
Key Operation: Control Lock: SET, Enter 38 and depress the [#/NS] key.
[0] [1] [#/NS]
[5] [0] [AT/TL]
[0] [0] [AT/TL]
[0] [2] [#/NS]
[1] [0] [0] [AT/TL]
[0] [0] [AT/TL]

4.20 Manager Pass Code Programming (Submode 39)

Manager Pass Code in Z mode or SET mode can be programmed here, which restricts the access to
Z, and SET modes only for a manager.
CONDITION
OPERATION
39 [#/NS]
NOTE: If you enter "0000", the ECR is released from Pass Code System.
Example) To program the following Manager Pass Codes.
Pass Code in Z mode:
Pass Code in SET mode:
Key Operation: Control Lock: SET, Enter 39 and depress the [#/NS] key.
[0] [1] [#/NS]
[0] [1] [0] [1] [AT/TL]
[0] [2] [#/NS]
[0] [2] [0] [2] [AT/TL]
3 digits
Non-taxable
4 digits
Non-taxable
([+] key)
(Preset Amount)
[3] [AT/TL] (HALO digit)
(Tax Status (Non-taxable))
([-] key)
(Preset Amount)
[4] [AT/TL] (HALO digit)
(Tax Status (Non-taxable))
[#/NS] (To complete this submode.)
Anytime outside a sale
Control Lock: SET
|Mode Code| [#/NS]
2 digits (01 or 02)
01: Z mode
02: SET mode
(Z mode)
(Pass Code)
(SET mode)
(Pass Code)
[#/NS] (To complete this submode.)
4.20 Manager Pass Code Programming (Submode 39)
Repeat for the other Pass Code.
|Pass Code|
4 digits
(0000 to 9999)
(See NOTE below.)
0101
0202
4-30
EO1-11149
35* 35*  
[AT/TL] [#/NS]
35*  
35*