Table of Contents
Advertisement
4. PROGRAMMING OPERATIONS
4.15 Function Key (Combination Key) Setting (Submode 34)
A string of key opeartions can be set on each FUNCTION key ([FUNCTION 1] to [FUNCTION 10]).
Using such programmed [FUNCTION] keys, the operator can eliminate time in various routine
operation procedures. (Up to 10 strokes of key operations can be set to each [FUNCTION] key.)
Anytime outside a sale
CONDITION
Control Lock: SET
OPERATION
34 [#/NS]
NOTES:
1. To delete a string of key operations once set on a FUNCTION key, operate as follows.
34 [#/NS]
2. Neither [C], [RF], [JF] nor [FUNCTION] keys can be set in a string of keys in the setting
operation above.
3. The [FUNCTION] key should be set beforehand. For details, please contact your TOSHIBA
TEC representative.
Example) To set the following key operation as [FUNCTION 1] key:
100 [DEPT 1] [ST] [AT/TL]
Key Operation: Control Lock: SET, Enter 34 and depress the [#/NS] key.
Repeat for other FUNCTION keys.
[FUNCTION]
[KEY].........[KEY]
Depress one of the
Depress the keys to be
[FUNCTION] keys.
contained in the key string.
(FUNCTION 1 to
(Max. 10 strokes)
FUNCTION 10)
Repeatable for other FUNCTION keys
whose string of keys are to be deleted.
[FUNCTION]
[FUNCTION 1]
[1] [0] [0] [DEPT 1] [ST] [AT/TL]
[FUNCTION 1]
[#/NS]
4.15 Function Key (Combination Key) Setting (Submode 34)
[FUNCTION]
Same key
4-25
[FUNCTION]
Depress the same
FUNCTION key that
was depressed at the
declaration.
[#/NS]
35*
35*
EO1-11149
[#/NS]
Advertisement
Chapters
Table of Contents
