Drawer Warning Time Setting - TEC MA-1350-1 Series Programming Manual

Drawer Warning Time Setting

3 9 @/FOR
Declaration of Program No. 39 for
Drawer Warning Time Setting
TEC
1343 PEACH DRIVE
PHONE: 87-6437
Open
Closed: every Wednesday
11-28-1997
NOTES: 1. The value of 0 second cannot be programmed. (To clear Warning Mode, reset the Warn-
ing option itself.)
2. After an All Memory Clear operation, the value of 15 seconds is set automatically as
standard value.
3. This setting will be effective only when the following options are selected in System
Option Setting:
Max. 2 digits;
1 to 99 (seconds)
STORE
8:00am to 7:00pm
#0
P39
20
0093 12:21TM
Address 21 - Bit 2:
Address 19 - Bit 3:
AT/TL
Time length (seconds) set for drawer warning
Drawer Warning Alarm "ACTIVE" (SET status)
Drawer-close "COMPULSORY" (SET status)
- 77 -
EO3-11084
MA-1350-1 SERIES