Table of Contents
Advertisement
4. PROGRAMMING OPERATIONS
4.14 Footer Message Programming (Submode 31)
A Footer message (max. 120 characters; 24 characters x 5 lines) to be printed on the footer portion of
receipt can be programmed here.
Anytime outside a sale
CONDITION
Control Lock: SET
OPERATION
31 [#/NS]
NOTE: Entering 2 digits of numeric code provides an alphanumeric character of Footer message.
Therefore, odd number of numeric digit entry will cause an error. When less than 48 digits
of numeric data are entered, this ECR uses space code entry.
includes spaces at the beginning, entering space code is required at the beginning of data
entry. For the Footer message, up to 24 regular-sized or 12 double-sized characters can
be entered. Also a combination of both types can be entered.
Example) To program the following Footer message
B a r
g a
T u e s d a y
C o m e
4.15 Function Key (Combination Key) Setting (Submode 34)
A string of key opeartions can be set on each FUNCTION key ([FUNCTION 1] to [FUNCTION 10]).
Using such programmed [FUNCTION] keys, the operator can eliminate time in various routine
operation procedures. (Up to 10 strokes of key operations can be set to each [FUNCTION] key.)
Anytime outside a sale
CONDITION
OPERATION
Control Lock: SET
34 [#/NS]
Repeat for other lines.
|Line No.| [#/NS]
2 digits (01 to 05)
i
n
s a
l
e s
.
t
o
s a v e
Repeat for other FUNCTION keys.
[FUNCTION]
[KEY].........[KEY]
Depress one of the
[FUNCTION] keys.
(FUNCTION 1 to
FUNCTION 10)
4.14 Footer Message Programming (Submode 31)
Character entry [AT/TL]
Max. 24 characters
(See NOTE below.)
o n
e v e r
m o n e y
Depress the keys to be
contained in the key string.
(Max. 10 strokes)
4-22
If a Footer message
y
Line No. 1
Line No. 2
!
Line No. 3
Line No. 4
Line No. 5
[FUNCTION]
Depress the same
FUNCTION key that
was depressed at the
declaration.
EO1-11148
[#/NS]
[#/NS]
Advertisement
Chapters
Table of Contents
