Table of Contents
Advertisement
45
Drive Roller/Front Roller
1. Release all treadbelt tension. 9/16" bolts on rear roller.
2. Remove drive belt from drive motor. Release tension on drive motor tensioning hook (7/16" nut
located underside of motor pan). Pivot motor towards treadbelt and slide drive-belt off.
3. Remove (2) Philips Head or (2) Hex Head screws securing drive roller to treadmill frame.
4. Remove roller.
5. REVERSE STEPS FOR INSTALL /FOLLOW TENSIONING PROCEDURES
Hide quick links:
Advertisement
Table of Contents
