Mounting Surface Specification
These specifications apply to any Phaser 7750 printer used as a table-top printer,
without a lower tray assembly or cart. There are 4 feet on the bottom of the printer.
The right hand side of the printer is more susceptible to problems due to foot
placement.
1.
In order to function properly, the printer must be located on a surface with the
following minimum dimensions. All 4 feet must rest squarely on the mounting
surface.
485 mm Min
19.10 in
2.
Mounting surface flatness must be within the range shown in the following
figure.
5mm Max
1-10
530 mm Min
20.87 in
Right Hand Side
Phaser 7750 Printer Service Manual
7750-339
7750-340