Waste Cartridge Sensor Holder
1.
Open the front door.
2.
Open the waste cartridge cover.
Note
To avoid a toner spill, use care in removing the waste cartridge.
1.
Remove the waste cartridge.
2.
Remove 1 screw securing the waste cartridge pivot hinge and remove the hinge
and cover.
3.
Remove the waste cartridge sensor holder, disconnecting wire harnesses, if
necessary to replace the sensor.
Waste
Cartridge
Sensor
Holder
8-18
Screw
Waste
Cartridge
Cover
Waste
Cartridge
FRONT
Phaser 7750 Printer Service Manual
7750-129