Test
Jam Info
Fault History
Built-In Test Prints
troubleshooting image-quality problems.
Paper Path Options
4-4
Front Panel Display
No Static Jam Detected
or
Static Jam: area name
<nnn> text: mmm
Prints pre-defined images stored in the engine firmware for
For Print Laser, check only: Selects tray, count of/continuous sheets,
simplex/duplex, offset, media type/weight, finisher, staple.
Source tray: Tray 2-5,
Tray1/ MPT
Yes
No
Current # sheets is n
Select new # sheets?
Yes
No
Simplex/Duplex:
Change Duplex setting?
Yes
No
Offset: None, Auto, Front, Rear
Set a new offset?
Yes
No
Media Type:
Set New Media Type?
Yes
No
Output Destination
Change Output Setting?
Yes
No
Stapling is:
Set new stapling options?
Yes
No
Test Operation Definition
Location of Jam
<Press Back or Cancel to exit.>
<nnn>: is a service defined
numeric code, see "Service Usage
Profile Status Codes" on page A-5
for code definitions.
text is the fault description.
mmm: is the fault count. The
maximum fault count is 100 and
rolls to 1 on overflow. All count
values are 0 at power on.
Press Up/Down to change setting.
Press Up/Down to change the
number.
Press Info to shift column.
Press Up/Down to change setting.
Press Up/Down to change setting.
Press Up/Down to change setting.
Press Up/Down to change setting.
This option is only available with an
optional finisher installed.
Press Up/Down to change setting
This option is only available with an
optional finisher installed.
Phaser 7750 Printer Service Manual