Left Cover Assembly (Left Hand Door A)
1.
Remove the rear cover, see page 8-6.
2.
Remove the Left Hand Rear Mid Cover, see page 8-7.
3.
Remove Tray 1 /(MPT), see page 8-9.
4.
Remove the fuser front cover.
5.
Open the left cover.
6.
Remove 1 screw from the plastic harness cover and remove the cover.
7.
Disconnect 3 wiring harnesses.
8.
Remove the retaining clip off the link mounting post.
9.
While supporting the door, remove the link.
10.
Lower the door to approximately 75-90
PLASTIC
HARNESS
COVER
Service Parts Disassembly
o
and lift off the pivot pins to remove.
75-90
DEGREES
RETAINING CLIP
7750-014
8-11