Top Rear Cover
1.
Remove the rear cover, see page 8-6.
2.
Open the Left-Hand Door A.
3.
Loosen 1 screw from the top rear cover.
4.
There is a hidden captive tab on the front and side of this cover that resists the
upward pull. Place your finger on the front side of the cover to release the tab and
pull towards you.
Cover, Left-Hand Rear, Mid
1.
Remove the rear cover.
2.
Remove 1 screw from the Left-Hand Rear Mid Cover.
3.
Open the Left-Hand Door.
4.
Lift the cover up to release captive hooks then toward you out of the printer.
Service Parts Disassembly
8-7