Xerox 7750DXF - Phaser Color Laser Printer Service Manual page 133

Phaser 7750 series
Hide thumbs Also See for 7750DXF - Phaser Color Laser Printer:
Table of Contents

Advertisement

Test
Print Laser Check
Print Halftones
Print Grid 1-dot
Print Fast Scan 8
Tone
Sensor Tests
The technician should test the functionality of each sensor by blocking the
sensor and watching its state change on the front panel.
NOTE
Several jam sensors only change state if a jam has occurred. All doors (interlock
switches) must remain closed or defeated to test for a changed state.
NOTE
The default state of all sensors are shown under the following conditions:.
The printer's front panel displays "Ready to Print."
All covers are closed.
All routine maintenance items and toner cartridges are installed.
All trays and Tray 1 (MPT) have paper in them.
No paper is in the paper path or Finisher.
The Finisher is docked correctly to the printer.
No motor tests have been performed to change the position of any components.
The waste cartridge is not full.
Ambient Temp/
Humidity
Fuser Temperature
Interlocks
General Troubleshooting
Front Panel Display
Fuser warming up
Laser Init
Startup | Imaging | Delivering |
Finishing
Laser Done
HalfTones Init
Startup | Imaging | Delivering |
Finishing
HalfTones Done
Grid Init
Startup | Imaging | Delivering |
Finishing
Grid Done
Scan Init
Startup | Imaging | Delivering |
Finishing
Scan Done
o
Temperature is XX
Humidity is XX%
o
Front Temp is XX
C
o
Back Temp is XX
C
Front (or Right) Door is L
(A) Left Upper Door L
(D) Duplex Cover is L
(B) Left Lower Door is L
(C) Optional Tray Left Cover L
Test Operation Definition
This is a quick test for all four laser
colors, including developer and
toner.
All four primaries are present on
the page. The print should appear
grey.
Prints 6 pages of 100% solid fill for;
Yellow, Magenta, Cyan, Black, Red
and Green.
This print displays the four primary
color lines in a grid pattern. See
"RegiCon Adjustment Procedures"
on page 6-5".
Prints four pages of eight tones for
each primary color.
Note: Use SEF to see all scans.
C
H = Open
L = Closed
NOTE
Only one door can be open
at a time to run this test.
4-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 7750bPhaser 7750dnPhaser 7750gxPhaser 7750

Table of Contents