Fuser Fan Assembly
1.
Remove the rear cover, see page 8-6.
2.
Remove the top cover, see page 8-5.
3.
Remove the right side cover.
4.
Note the routing of the wiring harness.
Note
It is easier to re-install the wire harness if the fuser fan and plastic mounting
bracket are removed from the printer.
5.
Remove the 2 screws securing the fuser fan assembly and remove the assembly.
6.
Disconnect the wiring harness.
8-32
Locating Pin
Phaser 7750 Printer Service Manual
7750-132