Table of Contents
Advertisement
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
The ADSL Settings screen displays:
2.
In the Internet Service Provider drop-down list, select your ISP.
3.
Specify the transfer mode.
The transfer mode can be PTM (Packet Transfer Mode) or ATM (Asynchronous Transfer
Mode). The VDSL2 interface supports PTM. PTM transports packets (IP, PPP, Ethernet,
MPLS, and so on) over DSL links as an alternative to using ATM. PTM is based on the
Ethernet in the First Mile (EFM) IEEE802.3ah standard.
4.
Select the DSL mode. The available settings depend on the selection in the Transfer Mode
list.
•
If the Transfer Mode is ATM, the DSL mode can be Auto, ADSL, ADSL2, or ADSL2+.
•
If the transfer mode is PTM, the DSL mode is VDSL (Very-high-bit-rate digital
subscriber line).
5.
From the WAN connection drop down menu, select WAN1.
•
If the DSL port is plugged in, WAN1 is configured for DSL.
•
If the WAN Ethernet port is plugged in, WAN1 is configured for Ethernet.
•
If both the DSL port and WAN Ethernet port have been plugged in, only the DSL port
is active and the WAN Ethernet port is disabled because only one WAN port can be
active.
NETGEAR genie Advanced Home
44
Advertisement
Table of Contents
