N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
To view or change the basic wireless setup:
1.
Select BASIC > Wireless.
The Wireless Setup screen displays:
The screen sections, settings, and procedures are explained in the following sections.
2.
Make any changes that are needed.
3.
Click Apply.
Your settings are saved.
If you were connected wirelessly to the modem router and you changed the SSID or
wireless security, you are disconnected from the network.
4.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
•
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
•
Does your wireless device or computer show up on the Attached Devices screen? If it
does, it is connected to the network.
•
If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your modem router.
NETGEAR genie Basic Settings
31
Scroll to
view more
settings