Advertisement
Quick Links
Installation Guide
N750 Wireless Dual Band Gigabit Router
Premium Edition
WNDR4300
Package Contents:
Ethernet cable
Power adapter
N750 Wireless Router
Step 1:
Step 2:
Connect one end of the
Unplug the power
yellow Ethernet cable
to turn off your modem.
to your modem, and the
other end to the Internet
port on your router.
DSL
or cable
Internet
Power On/Off
Modem
Step 3:
Plug in the power to
turn on your modem.
Wait approximately 2 minutes
until your modem turns on.
If your modem has
a battery backup,
first remove and reinsert
the battery before connecting
your modem to power.
Power On/Off
N750 Wireless Router
Step 4:
Connect the power adapter to the
router, then plug it into an outlet.
Wait for the 2.4 GHz LED (
)
2.4
GHz
to light.
If none of the LEDs light, make sure
that the Power On/Off button is in the
on position (pushed in).
(not included)
Laptop or desktop
computer
Step 5:
Connect your computer
to the router
Step 6:
Open a browser.
If the web page does not
display, close and reopen
the browser, then enter
http://www.routerlogin.net
in the address bar, or
check the "Troubleshooting"
section on the back of
this installation guide.
Advertisement
Related Manuals for NETGEAR NT50 WNDR4300
Summary of Contents for NETGEAR NT50 WNDR4300
- Page 1 Installation Guide N750 Wireless Dual Band Gigabit Router Step 1: Step 2: Premium Edition Connect one end of the (not included) Unplug the power Laptop or desktop WNDR4300 yellow Ethernet cable to turn off your modem. computer Step 5: to your modem, and the other end to the Internet Connect your computer Package Contents:...
-
Page 2: Connect Wireless Devices To Your Router
Click here NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.