Factory Settings - NETGEAR N600 DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

Factory Settings

You can return the modem router to its factory settings. On the bottom of the modem router,
use the end of a paper clip or some other similar object to press and hold the Restore
Factory Settings button for at least 7 seconds. The modem router returns to the factory
settings shown in the following table.
Table 4. Factory default settings
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
savings time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
Default Behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default address
1492
AutoSensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Enabled or disabled
GMT for WW except GR, GMT+1 for GR, GMT-8 for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Supplemental Information
149