NETGEAR N600 DGND3800B User Manual page 166

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
To check the VPN connection, you can initiate a request from the remote computer to the
VPN router's network by using the Connect option in the modem router screen:
My Connections\DGD3300v2
Since the remote computer has a dynamically assigned WAN IP address, it has to initiate
the request.
a. Right-click the system tray icon to open the pop-up menu.
b. Select Connect to open the My Connections list.
c. Select toDGND3800.
The modem router reports the results of the attempt to connect. Once the connection is
established, you can access resources of the network connected to the VPN router.
To perform a ping test using this example, start from the remote computer:

1. Establish an Internet connection from the computer.
2. On the Windows taskbar, click the Start button, and then select Run.
3. Type ping -t 192.168.0.1, and then click OK.
This causes a continuous ping to be sent to the VPN router. Within 2 minutes, the ping
response should change from timed out to reply.
Once the connection is established, you can open the browser on the computer and enter the
LAN IP address of the VPN router. After a short wait, you should see the login screen of the
VPN router (unless another computer already has the VPN router management interface
open).
Right-click the system
tray icon to open the
pop-up menu.
VPN Configuration
166