Advanced Wireless Settings; Control The Wireless Radio - NETGEAR N600 DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

Advanced Wireless Settings

You can use this screen to turn the wireless radio on and off, to specify WPS settings, to use
AP mode, and to set up a wireless access list.
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.

Control the Wireless Radio

By default, the wireless radio is enabled so that you can connect wirelessly to the modem
router. You can turn the wireless radio on or off in the Advanced Wireless Settings screen or
by using the WiFi On/Off button on the modem router front panel. When the wireless radio is
off, you can still use an Ethernet cable for a LAN connection to the modem router.
To turn the wireless radio on or off:

1. Select ADVANCED > Advanced Setup > Wireless Settings.
By default, the Enable Wireless Router Radio check box is selected.
2. Select or clear the Enable Wireless Router Radio check box.
If you clear this check box, this turns off the WiFi feature of the wireless modem router.
3. Click Apply.
Your changes take effect.
Advanced Settings
95